Products
|
| Home - Products - Clement
Dump Trailer Designs - Frameless End Dump Trailer |
|
StarLite 2 - Frameless Steel End Dump Trailer
| At 10,240 pounds, there's no
other 38-ft. steel or aluminum trailer that matches StarLite's
performance! |
Our starting point was the basic body shell of America's most
popular 38-ft. steel end dump, the Clement FleetStar. Every part
and component of the trailer was reviewed with the goal of increasing
trailer strength and durability, while squeezing out every ounce
of unnecessary weight. The result is Clement's StarLite: a newly-designed,
field-tested 38-ft. trailer, which will outperform other steel
trailers and at the same time carry a ton more legal payload
every trip.
|
|
| Lighter than most aluminum trailers, StarLite gives
you the strength of steel at an initial cost that's thousands of
dollars less than comparable aluminum trailers. Maintenance cost
will also be reduced with the all-steel StarLite. If maximum profits
are important to you, see the Clement StarLite, the strength of
steel and the payloads of aluminum! |
|
| StarLite 2 features that add to its record-setting
performance! |
|
Wheels-on-the-ground dumping. There are no axle stops on the StarLite, so the wheels stay on the ground through the entire
dump cycle.
Space-age
Body - StarLite's brand new body shell has both
curved sides and a curved floor. Every ounce of excess
weight has been squeezed out.
Hat-shaped
Longitudinal - StarLite's hat-shaped single longitudinal
has the same wide support as two separate box longitudinals,
yet it's lighter and much stronger. Gone are the center
cross members and numerous weld joints. |
|
|
Out of the way when dumping
FlipLite design swings lights
and flaps out of the way automatically when the gate
lock opens.
|
|
|
SPECIFICATIONS
|
Chassis
- Suspension: 36,000 # Single Point-2 Leaf
- Axles: (2) 102", 22,500 lb, 5" Round,
Common Inner/Outer Bearings
- Wheels: 8.25 x 22.5, 10 Hole Hub- Piloted Disc
- Hubs: 10 Hole Pilot Hub
- Tires: 11 x 22.5 Radial
- Brakes: Air 16 1/2" x
7"Outboard Dayton
X30 Drum
- ABS: 2S 1M
- Axle Spacing: 50"
- Lights: 12 Volt Sealed Beam, Rubber Grommet
- Wiring: Sealed Harness Modular Plug In
- Mud Flaps: Rubber Rear Only
- Draft Arms: 3" x 4" x 1/8" Tubing
- King Pin Plate: 1/4" AR450
(Rocking & Breakaway)
- Back Up Alarm: Yes
|
Body
- Type: Steel Bathtub style
body for sand, gravel, coal, hazardous waste and aggregate
- Floor: 10 gauge HT50
- Sides: 12 gauge HT50
- Tailgate: 10 gauge HT50, Top Hinged, Air Locked
w/ Air Line to Front
- Front: 10 gauge HT50
- Paint: One color urethane enamel over primed
surface
- Longitudinal: 10 gauge
8" x 22"
- Top Rail: 4"x4"x 1/8" Tubing
- Side Braces: 10 - 12 gauge HT50
- Hoist Housing: 10 gauge HT50 Dumps with all wheels
on ground
Packaged Options
- Side Boards: 6" aluminum side boards
- Landing Legs: Non-load bearing on body - Removable
- Fender: Aluminum tread plate (AGM03)
- Slant Tailgate: Air operated (BHH)
- Tarp Hooks: Located at tailgate (4)
|
|
| |
Mark
Overholt -Tiger General, Inc. 6867 Wooster Pike Medina,
Ohio 44256
Call Toll
Free: 1-800-433-5608 |
|
|
|
